LIST OF EXPERIMENTS

-
Savitribai Phule Pune University, Pune
TE Mechanical and TE Automobile (2015 course)
Course Code: 302045                                                 Course Name : Metrology And Quality Control

Term-Work

LIST OF EXPERIMENTS
Part:  A]
Experiment no. 1, 4  and 6 are mandatory. Perform any three from experiment no. 2
to 5 & any three from experiment no. 7 to 10.
1. Demonstration of linear and angular measuring instruments, slip gauges and their applications.
2.  Error  determination  of  linear  /  angular  measuring  instruments  and  determination  of  linear       and angular dimensions of given part, (MSA: Gauge R & R).
3. Calibration of measuring instrument. Example – Dial gauge, Micrometer, Vernier (any one)
  (Refer ISO 17025).
4.  Verification  of  dimensions  and  geometry  of  given  components  using  Mechanical  /Pneumatic
comparator.  [An assignment with this experiment write-up as,  Introduction to use of Standard
CODE viz. ASME-Y14.5, ISO-1101].
5. Machine tool alignment testing on machine tool – Lathe / Drilling / Milling.
6.  Demonstration  of  surfaces  inspection  using  optical  flat/interferometers.  /  Demonstration  of
surface roughness measurement using surface roughness tester.
7. Determination of geometry  and  dimensions of given composite object / single point tool, using
profile projector and tool maker’s microscope.
8. Measurement of thread parameters using floating carriage diameter measuring machine.
9.  Measurement  of  spur  gear  parameters  using  Gear  Tooth  Vernier  /  Span  Micrometer  /  Gear
Rolling Tester.
10. Determination of given geometry using coordinate measuring machine (CMM).
    Part: B]
Statistical Quality Control (SQC) (Any Two)
    Note - Use of computational tools [such as Minitab / Matlab / MS Excel] are recommended
1.  Analyze  the  fault  in  given  batch  of  specimens  by  using  seven  quality  control  tools  for
    engineering application. Submission of these assignments USING STANDAED FORMATS.
2.  Determination of process capability from given components and plot variable control chart/
    attribute chart.
3.  Case study on various tools in Total Quality Management (TQM).
    Part: C] Industrial visit to:
    Calibration lab /Quality control lab / CMM Lab / Gear Inspection Unit
    OR
QA/QC Unit of Automotive Industry / Engineering Industry.

Comments

Post a Comment

Popular posts from this blog

Experiment No. 1 Demonstration of linear and angular measuring instruments, slip gauges and their applications.

-
Image
EXPERIMENT NO: - 01 Aim:- Demonstration of linear and angular measuring instruments, slip gauges and their applications. Apparatus :-Vernier Caliper, Vernier Height Gauge, Micrometer, And Measuring Parts Vernier Height Gauge This is just as vernier caliper, equipped with special base block and other attachment which make the instrument suitable for height measurements. Along with the sliding jaw assembly, arrangement is provided to carry a removable clamp. The upper and lower surfaces of the measuring jaws are parallel to the base, so that it can be used for measurements over or under surface. The vernier height gauge is mainly used in the inspection of parts and work. With a scribing attachment in place of measuring jow, this can be used to scribe lines at certain distance above the surface. However dial indicator Can also be attached in the clamp and many useful measurements made as it exactly   gives indication when dial tip just touching surface. For all these measurement, use ...
Read more

Experiment No 9 Determination of geometry and dimensions of given composite object / single point tool, using profile projector and tool maker’s microscope.

-
Image
  Experiment No. 9 Title: - Experiment on tool maker’s microscope   Aim :- Study and Application of Tool Maker's Microscope .   Apparatus :-Tool maker’s microscope, specimen. Theory: - Introduction:- The tool maker’s microscope is a versatile instrument that measure by optical means with no pressure being involved, thus very useful for measurement on small and delicate parts. It is designed for:   a)    Measurement on parts of complex form e.g. - profile of external thread, tool, templates, gauges, etc. b)    Measuring center to center distance of holes in any plane. c)    A variety of linear measurements. d) Accurate angular measurements.   [1] Use of Tool Makers microscope for screw thread parameter measurement. Use of profile projector for screw thread parameter and slot dimensions measurement. Please see the video animation for working of all the parts of Tool Maker's Microscope   Tool maker’s mi...
Read more